Big Black Boots

Secure Order Form
for custom
Wesco Highliner
Lineman Boots

 Wesco
Home | Boot Menu | Main Page for these boots | Shipping | Boot FAQ | Contact

The whole order form is on this page.
Scroll down to see everything.

Highliner Lineman Boot

Use this form to order custom made Wesco "Highliner" Lineman boots. These are boots with options such as insulation or in sizes or heights which aren't available in our line of standard "stock" Wesco lineman boots. These custom boots are currently taking about 14 weeks to build.

If you'd like to order standard "stock" "Highliner" Lineman boots, which are usually on the shelf and ready to ship, please click here to go to the order form for stock "Highliner" Lineman boots.

Click here for an explanation of the differences between stock, and custom boots.

Just scroll down to see this whole order form... it's all on this page. You don't have place an order. You're welcome to just read the additional information that's on this page.

Each type of boot has its own order form. Click here to see a complete list of other order forms.

Please fill out the form below and hit "Send" to transmit it to BIG BLACK BOOTS. Your web browser should display a short acknowledgement with your order details shortly after you hit "send".

Our order processing robot will then send a short confirmation email immediately then a human will send a full confirmation of your order via email... usually within a day. We do not run the charge or send a PayPal invoice until a human has reviewed your order and emailed a confirmation to you.

Don't worry if you forget something. You can send follow-up email to us anytime at For our part, we will email you with questions, if we have any, and keep you informed about your order.

Payment:

Click here to see how you can pay for your order.

Shipping:

Click here to see information and prices for shipping.

Order Details for Wesco "Highliner" Lineman Boots:

Note: Production time for these custom made lineman boots is currently about 14 weeks . If you can find the combination of size, height and features you want in our stock boots, they normally ship in a day or two.

Fill this in
Custom boots
Made to measure custom boots -- my measurements are already on file
      Note: The first time you get made to measure boots we'll refer you directly to Wesco

Click here for advice on choosing the correct size. Measure your feet and order boots the same size as your feet not the same size as some other footwear you have.

Size / Width Tables for Custom "Highliner" Lineman Boots

Sizes available when using Wesco's traditional "old" #9109 last with the "bump" toe and 2" / 50mm logger heel. This is the last we use if possible unless you request the new "sleek" toe last or a low heel


 2 ½ 3 ½ 4 ½ 5 ½ 6 ½ 7 ½ 8 ½ 9 ½ 10 ½ 11 ½ 12 ½ 13 ½ 14 ½ 15 ½ 16½ 17 ½ 18 ½ 19½  
AAA                 •   • • •                                               AAA
AA                 • • •       •                                           AA
A     • • • • • • • • • • • • • • • • • • • • •                           A
B     • • • • • • • • • • • • • • • • • • • • •                           B
C     • • • • • • • • • • • • • • • • • • • • •                           C
D     • • • • • • • • • • • • • • • • • • • • •                           D
E     • • • • • • • • • • • • • • • • • • • • •   •   •                   E
EE     • • • • • • • • • • • • • • • • • • • • •   •   •                   EE
EEE     • • • • • • • • • • • • • • • • • • • • •                           EEE

2 ½ 3 ½ 4 ½ 5 ½ 6 ½ 7 ½ 8 ½ 9 ½ 10 ½ 11 ½ 12 ½ 13 ½ 14 ½ 15 ½ 16½ 17 ½ 18 ½ 19½  


The table above shows the U.S. men's size range for the custom Wesco Jobmaster, Highliner,
Boss and Firestormer boots built with the traditional "old" #9109 last.
The boots can be made in any size / width combination shown in green.


Sizes available using Wesco's standard "new" #9165 last with the sleeker toe and 2" / 50mm logger heel


2 ½ 3 ½ 4 ½ 5 ½ 6 ½ 7 ½ 8 ½ 9 ½ 10 ½ 11 ½ 12 ½ 13 ½ 14 ½ 15 ½ 16 ½ 17 ½ 18 ½ 19½  
AAA         • • • • • • • • • • • • • • • • • • • • •   •   •               AAA
AA     • • • • • • • • • • • • • • • • • • • • • • •   •   •               AA
A     • • • • • • • • • • • • • • • • • • • • • • •   •   •             • A
B     • • • • • • • • • • • • • • • • • • • • • • •   •   •       •       B
C • • • • • • • • • • • • • • • • • • • • • • • • •   •   •               C
D • • • • • • • • • • • • • • • • • • • • • • • • •   •   •       •     • D
E     • • • • • • • • • • • • • • • • • • • • • • •   •   •   •   •   •   E
EE     • • • • • • • • • • • • • • • • • • • • • • •   •   •               EE
EEE     • • • • • • • • • • • • • • • • • • • • • • •   •   •               EEE

2 ½ 3 ½ 4 ½ 5 ½ 6 ½ 7 ½ 8 ½ 9 ½ 10 ½ 11 ½ 12 ½ 13 ½ 14 ½ 15 ½ 16 ½ 17 ½ 18 ½ 19½  



The table above shows the U.S. men's size range for the custom Wesco Jobmaster, Highliner,
Boss and Firestormer boots built with the standard "new" #9165 last.
The boots can be made in any size / width combination shown in green.


Choose Boot Size:

Boot Size: U.S. Men's Sizes
Fill this in
Boot Width:

Note: Wesco boots, like many boots, are designed to be worn with heavy boot socks. They are made slightly large to allow for this. So, if your feet measure US Men's size 9½ and you wear size 9½ dress shoes, then size 9½ Wesco boots, worn with heavy boot socks, will fit you correctly.

If your feet are size 12 or longer, the extra room built into the Wesco boots is proportionally less generous than it is in smaller sizes. You might consider ordering your boots a half size large to allow room for expansion of your feet.
Fill this in
Custom Highliner Boot Prices
10" 12" 14" 16" 18" 20"
$414 $429 $437 $445 $506 $552



Height of boot in inches:

Note: To determine where the top of the boot will be on your leg, measure up from the heel of your stockinged feet along the back of your leg. This should be done while in a seated position with the knee bent at a 90 degree angle.

The initial height of Highliner lineman boots will be 1" shorter than specified.
e.g. if you order a 16" boot, it will come up 15" from your heel.
This is normal for ALL lace-up boots. Read about this in our Boot FAQ here.

As they break in, these boots drop about a half inch or more in height because of creasing at the ankles.
Leather lined boots will stay very close to their initial height.

To convert from inches to centimeters, multiply inches by 2.54

Highliner Lineman Boot Options:

If there is an extra charge for an option, it is noted in parentheses after the option.

Leather Type and Color:

-- Click here to see information about leather choices
-- Click here to see color samples
Heavy Weight Oil Tanned Leather - 7 Ounce / 2.8 mm

Oily matte finish - Meant to be oiled/greased to maintain water resistance and
breathability. Not intended to be shined but can be if desired. Difficult to shine/polish
until oil is removed from surface by washing several times with glycerin saddle soap.

Black Oil Tanned
Brown Oil Tanned
Redwood Oil Tanned

Above 3 leather types are the only ones which can be used with safety toes.

Black Pebble Oil Tanned ( $34 )

Medium Weight Leather - 5.5 - 6 oz / 2.3 mm

Caution: These dressy, boutique leathers may be scratched and marred by phone poles.

Black Tie Domain - silky / waxy black - takes a great shine ( $34 )
Burgundy Domain - silky / waxy dark brown - great shine ( $34 )
British Tan Leather - Light tan - oil or polish this leather ( $34 )
Burlap Explorer - light tan / oil-tanned matte finish ( $34 )
      Choose this leather with "Rough Out" leather option and
      #100H tan Vibram sole for desert combat boots

Other Leather Options

Smooth or Roughout Leather
Boots are normally made with the smooth leather side out,
but can also be made using the other rough/suede side out.

All Smooth Out Leather (Standard)
All Rough Out Leather

Lining of the Boot Shaft:

The foot area of Wesco boots is always leather lined in all configurations.

Click here for detailed information about these lining options...
then use your browser's BACK button to return here.

Standard, unlined boot shaft
Black Leather Lining ( $67 )
Tan / Buckskin Leather Lining ( $67 )
Brown Leather Lining ( $67 )
Tobacco Leather Lining ( $67 )
Platinum Leather Lining ( $67 )
Cambrelle® Lining ( $61 )
Cambrelle® & Kevlar® Lining ( $71 )

Toe Styles for Highliner Lineman Boots:

- Click here to see the toe styles
Lace-to-Toe Style
Semi-Lace-to-Toe Style
Regular Toe Style
Semi-Lace-to-Toe Style with Steel Safety toe - ( $16 )
Regular Toe Style with Steel Safety toe - ( $16 )
Semi-Lace-to-Toe Style with Composite Safety toe - ( $16 )
Regular Toe Style with Composite Safety toe - ( $16 )
      (Safety toes are not possible on lace-to-toe boots)

      (Safety toes only possible with the 7oz oil-tanned leathers)

Lacing Eyelets and Studs:

Brass (standard)
Nickel ($17)
Black ($17)

Stitching / Thread Color:

Standard - Heavy sole and upper thread is white, lightweight upper thread is brown
All Black stitching ($41)
Other colors are available at extra cost... contact us for pricing:
Heavyweight upper and sole stitching: Black, Orange, Khaki, White
Lightweight upper stitching: Brown, Black, Red, Navy, Sterling / light gray

Soles:

- Click here to see soles
#100 Vibram Heavy Lug Sole - black
#100F Vibram Heavy Lug Sole - black (fire resistant) ( $15 )
#100H Vibram Heavy Lug Sole - honey / tan ( $ 13 )
#430 Vibram Mini-Lug Sole - black
#700 Vibram Sole - black
Content above last edited 27 August, 2018 at 22:17 GMT



Big Black Boots is no longer taking orders. We have left most of our site up, including these order forms, because there is a lot of valuable information for customers who are interested in ordering boots direct from Wesco or Dehner. For instance, we have more detailed information about options than the manufacturer's website.

However, we have removed the ability to enter personal or payment information.


Big Black Boots Home Page

Email questions or comments to

Big Black Boots Web Pages - Copyright © 2019 Ron Belanger / Rich Filia / Big Black Boots
All Rights Reserved - links permitted and encouraged

Payment section last edited #DATETIME_GMT d MMMM, yyyy 'at' HH:mm 'GMT' #